Skip to content

Products/ LIGHTING CONTROL/ DMX2DALI+

Traxon e:cue DMX2DALI+

Traxon e:cue

Traxon e:cue DMX2DALI+

A flexible converter from DMX signal to DALI, DMX2DALI+ is a simple solution for controlling electrical DALI ballasts and dimmers using a DMX controller. DMX2DALI+’s flexibility makes installations easy by using auto and manual DMX addressing modes. Eight addressable consecutive DMX channels control eight DALI outputs. Each output supports up to 64 DALI ballasts or dimmers (broadcast mode), while one DMX2DALI+ supports up to 512 electrical DALI ballasts and dimmers, typically used for control of fluorescent lighting.

Manufacturer
Traxon e:cue
Luminaire type
Lighting control
On the manufacturer site

Technical data, dimensioned drawings and files are on the manufacturer’s own page, where the latest version always lives.

Key features

  • 8 DALI Broadcast outputs controlled by 8 DMX512Ch.
  • Up to 64 DALI ballasts per output (= 512 ballasts in total),
  • Single 100 to 240 V AC supply voltage
  • Power and DMX status LEDs
  • Manual and auto DMX addressing modes
  • DIP switch for configuration and manual addressing mode (offset)
  • Configurable DALI output on DMX signal loss
  • DIN rail mounting

Technical data

  • Dimensions (W x H x D): 88 x 90 x 63 mm / 3.46 x 3.54 x 2.48 in
  • Weight: 180 g / 0.4 lb
  • Power supply input: 100 … 240 V AC, 2-pin terminal, plug, solid cable cross-section, up to 2 mm²
  • Operating Temperature: -20 … 50 °C / -4 … 122 °F
  • Mounting: On 35 mm DIN rail (EN 60715)
  • Output interfaces: 8 x DALI, 2-pin terminal plug, 64 ballasts, max. 15 V, max. 128 mA, cable cross-section:, solid / stranded: 0.08 … 2.5 mm², with ferrule: 0.25 … 1.5 mm², stripping length: 6 … 7 mm, 1 x DMX512, 3-pin terminal …

Certifications

  • CE

Quote

Your quote request

Your quote is empty. Mark products in the catalogue with “Add to quote” — your selection is kept here.

Browse products