iGuzzini Billboard

Products / OUTDOOR LUMINAIRES/ BILLBOARD

iGuzzini

iGuzzini Billboard

Billboard line by iGuzzini: outdoor linear system enhancing vertical surfaces and architecture with uniform, efficient grazing light.

Manufacturer: iGuzzini
Luminaire type: Outdoor luminaires

from 322 €

260 € + VAT

VAT included. We'll put together the exact price for the version you choose in your quote.

On the manufacturer site

Full technical data, dimensioned drawings and files (IES, BIM) are on the manufacturer’s page – always the latest version.

Features

Pole-mounted urban lighting system for the use of LED light sources.
Installation on pole-head, side-arm or whip-arm poles.
Optical compartment made of die-cast aluminium alloy with steel springs and 4mm thick tempered glass.
No upward scattering.
Adjustable optical compartment (tilt angle ±15°).
Three optics available: STM, STW and ASF.
The product is available with Midnight protocol or with Zhaga Socket 4 Pin (up only).
Supplied with an outgoing cable L=500mm.
Overvoltage protection 10kV (common mode) and 10kV (differential mode).
The connection for pole installation is separate and can be purchased as an accessory separately. - Supplied with decompression valve.
The product is equipped with a hinge that allows opening without tools.
IP66, IK10.
Class II.
In the case of installations on insulated supports (e.g. fibreglass poles), please contact us to request a customised product equipped with an accessory that protects the device from possible failure due to electrostatic charges.
Dark Sky Approved : the IDA’s Fixture Seal of Approval programme certifies outdoor lighting fixtures as being Dark Sky friendly, so in compliance with the following: Maximum Correlated Color Temperature of 3000K.
Up-light allowance limited to 0.5% of total output, or 50 lumens, with no more than10 lumens in the 90-100 degree UL zone.
Luminaires are required to have fixed mounting to ensure they are installed as tested; there can be up to + or - 10° adjustment for levelling if needed.
Luminaires must have dimming capability to 10% full rating.

Protection and resistance

Class II
IP66
IK10 - Protected against 20 J shocks

Certifications

CE, ENEC-03, UK Conformity Assessed, DARKSKY, TISI